How to change the wheel by yourself

First of all, what needs to be done to replace a faulty wheel is to ensure traffic safety. It is necessary to move out of the way to the nearest Secure Trailer Drop Storage, preferably with a hard surface, stop, muffle the engine and install the car on a handbrake. If you change the wheel on the road, you need to designate the car as an emergency sign.

What you need to change the wheel

To replace the wheel yourself, you must have at least a spare tire or "dock." The usual location of these wheels is the luggage compartment of the car, under the carpet on the floor. In the same place, in many cases, a jack and a balloon key are stored in a separate purse. If the "ballonet" is regular, then it looks like a small L-shaped key, the non-standard key can look like a cross. It is very good to have in the car one or two chute, you can even wooden. Stops should be installed at the wheel, on the opposite side of the car, diagonally.

Beginning of work

At the beginning of the work, you need to get to the wheel bolts. They can be hidden by a decorative hood, you need to remove it by pulling yourself. Before you fully raise the wheel, you need to try to tear off the fixing bolts. To do this, you need to lift the body slightly with a jack, without lifting the wheel from the surface, insert the balloon key and rotate each bolt for one turn counter-clockwise. The jack must be installed in special places under the sills of the car. If the bolts are loosened up loosely, you can press the edge of the key with your foot, applying the weight of the whole body. Usually only the first turn of the bolt is loosened.

Turning the handle of the jack clockwise, you need to raise the wheel from the surface of the earth, with a margin of about five centimeters. The unscrewed bolts must be folded in one clean place, so as not to lose.

Setting the spare

We install a spare wheel on the hub or drum of the car, combining the mounting holes of the disk and the hub. On some models of cars for this purpose guide pins are provided. We fix the fixing bolts by hand, tighten them, turning the wheel on the axis to center the conical surfaces of the bolts and disks. Lower the jack down when the wheel touches the ground firmly, you can tighten the diagonal bolts with force. Finally, the bolts are tightened with the jack removed. The tire pressure is checked, and the restraints from the wheel are removed.

Practical tips

• To prolong the life of the wheels, the tire pressure must be regularly monitored.

• The jack, in order to serve longer, should be stored in a special purse, in places not accessible to corrosion.

• Faulty wheel is best repaired in the workshop of the tire fitting and kept in good order.

• It must be remembered that the wheel “JSO Towed My Car " is not suitable for daily operation. Therefore, it cannot be quickly traveled to distant distances.

• In order to remember the entire procedure for changing the wheel, you need to pay attention to the work of a professional, having stopped at the tire fitting shop.